1. Match Nozzle to Smallest Feature
Use a 0.4 mm nozzle for keychains, QR plaques, and standard lithophanes; switch to 0.2 mm nozzle only for micro-text under 1.0 mm stroke width.
Dial in optimal nozzle size, layer height, wall count, Arachne settings, ironing, and M600 filament swaps for every MeshForge Binary STL export.
Use a 0.4 mm nozzle for keychains, QR plaques, and standard lithophanes; switch to 0.2 mm nozzle only for micro-text under 1.0 mm stroke width.
Set 3 perimeter walls and enable Top Surface Ironing (15% flow, 30 mm/s) for embossed tags; use 6 walls + 100% rectilinear infill for lithophanes.
Check the Preview tab layer slider before printing to confirm filament change triggers on the exact first raised layer above the baseplate.
| Model Type | Nozzle | Layer Height | Walls / Perimeters | Infill | Critical Slicer Tip |
|---|---|---|---|---|---|
| Emboss Keychain / Badge Relief | 0.4 mm | 0.16 mm | 3 walls | 20% Gyroid | Enable Ironing on top surfaces for CNC-smooth plaques |
| Backlit Photo Lithophane (Flat) | 0.4 mm | 0.12 mm | 6 walls | 100% Rectilinear | Stand upright along Y-axis with 6mm brim for max photo detail |
| 2-Layer WiFi / URL QR Code Sign | 0.4 mm | 0.20 mm | 2 walls | 15% Grid | Insert M600 / Filament Change at Base + 0.20 mm (White base, Matte Black QR) |
| Ultra-Fine Logo Medallion | 0.2 mm | 0.08 mm | 4 walls | 25% Gyroid | Switch Wall Generator to Arachne for sharp tiny lettering |
| MSLA Resin Relief / Stamp | LCD 50µm | 0.05 mm | Solid | 100% | Tilt 30° with medium supports on back face to prevent suction cupping |
Flat embossed badges and QR signs look simple yet expose top-surface imperfections ruthlessly. Ensure your filament is dry, set Top Shell Layers to at least 5 (0.8 mm solid top skin), and switch Wall Generator to Arachne in Bambu Studio or PrusaSlicer so tiny isolated QR islands extrude solidly without pinholes.
If corners lift on wide signs over 120 mm, wash your textured PEI plate with warm dish soap, keep auxiliary part-cooling fan below 30% on PLA, and add 5 mm mouse-ear corner brims.
Optional—if your matte black top layer is already crisp with monotonic lines, skip ironing to avoid smearing edges into white quiet zones. On large logo plaques, ironing produces a stunning injection-molded sheen.
Your QR module width may be narrower than your nozzle extrusion width. Increase Sign Size (mm) in MeshForge until module width exceeds 1.2 mm, and enable Arachne Wall Generator in your slicer.
0.16 mm layer height gives noticeably smoother sloped bevels on embossed logos and badges while adding only ~18% print time over 0.20 mm.